295LFKSP LED Light and Horn with 4 tones 295LFKSP

 

LED Flashing Light with electronic horn mounted to a non-metallic surface mount enclosure--we combine our KSP Electronic horn and the MicroLert (see these products for individual specifications) with an enclosure to bring you this great value in an audio/visual alarm signal. Horn can produce 4 tones, which are switched with a normally open contact via the unit's terminal block wiring connection, or a single tone can be wired as the default tone. Tones are: "SB" ambulance, police, telephone, melody--"TB" Fast, Slow, High, and Low Pulsing Alarm. Db level is 95dB at 3 feet, and the device has a full volume control. Overall height is 7 inches x 4 3/4 inches deep x 5 inches wide. Heavy duty enclosure with mounting feet. The LED light visual signal has a unique flash pattern to get attention, which provides a uniform 360 degree light pattern. The LED Light produces 75 flashes per minute - each flash containing 7 rapid bursts of light (approximately 560 ms “on-time” and 240 ms “off-time”). The LED Light and Horn have independent power inputs so they may be controlled separately if desired. Impact resistant polycarbonate lens and base, PVC enclosure allows flat surface mounting, 120 VAC, or optional 12/24 Vdc version. You may also choose the KSP with the enclosure, without the LED light--select the appropriate option.

A great combination audible and visual signal!

• Voltage available: 120 VAC or 12/24 VDC version 
• Operating Current: .153mA @120Vac
• Temperature Range: -35C to 66C
• Flash Rate/ Minute75
• Candlepower Peak: N/A
• Listings: U.L. Light only
• Mounting: To be drilled for wiring by customer/ Surface mount
• LED life: 30,000 hours
• Indoor /outdoor use
• Dome Guard: None
• Audible Output: 95dBA @ 3' with internal volume control