All Products List

Most industrial plants today utilize a number of signaling alarm devices, both audible and visual. These alarms are used to alert employees to emergency conditions, such as a fire, noxious gas release, or chemical spills. They are also used to warn workers of moving objects, such as overhead cranes or forklift trucks, or to alert of automated machine or industrial robot start-up. Signaling devices are also used to notify of non-emergency conditions, such as sounding an alarm when goods get caught on a conveyor, or an automated process malfunctions. In all cases, and in order to ensure a quick response, the alarm signal should be simple and clearly understood.

When choosing an audible signal, there are many points to consider, and some crossover considerations for visual signals:

1. What is its function? For example, will the alarm be used to provide a general emergency warning, or will it be used for non-emergency notification?
2. How large is the area which needs to be covered?
3. How far away would someone need to hear or see the alarm?
4. Are there obstructions like machinery and walls to block the travel of sound / light?
5. How high must the alarm be mounted from the floor--higher is NOT better, as you are moving further from the ears that need to hear the alarm, or off horizontal axis for the eyes that would need to see a visual signal.
6. Will a visual signal be used once the audible alarm gets attention to further indicate the issue, or level of emergency or process/machinery status?
7. What voltage is available for the alarm?
8. Are there special mounting considerations for installation?
9. Ambient noise level: The alarm signal should be 6 db higher than the ambient noise level.

As a rule of thumb, consider that sound output drops by 6 decibels each time the distance between the human ear and the sound source is doubled. For example:

Assuming that the ambient noise level is 90 dB, then the alarm device in the above example will cover a distance of approximately 80’. Consider also that a 3 dB increase in sound output doubles the loudness. For example, if a signal is rated at 100 dB at 10’, then a signal twice as loud would be rated at 113 dB at 10’.