Andon Light LED 56mm PREF

Model PREF LED Andon Tower Light 56mm (2 1/4 inch diameter)is capable of either Continuous burning (standard), or flashing (now a FREE option)the LED light. Pre-wired and pre-assembled, this unit can be used with the mounting options shown above (use "check box" selection). Specify colors of the tower by using the "check box" above, the tower can be 1 to 5 colors tall, and have a buzzer on top if you require (except 12 volt models.  Lenses are heat and shock resistant polycarbonate,Prism-cut lens design provides superior light diffusion, 80 flashes per minute if used in a flashing mode. LED lamps resist vibration, and virtually eliminates maintenance. Buzzer option is available and produces a pulsed beep buzzer tone at 80db@1 meter (must be mounted as the top most component on the tower)IP56 rated. CE compliant, Specify Voltage by selecting above. If you prefer a turnkey asemled solution, please see the PREF-110-3-Custom on our site for an example of our popular assembled versions--also available assembled in a single or up to 5 color LED andon--please inquire.

An LED Tower Light at a price that will not break the bank!

• Voltage available: 12VDC/12VAC, 24VDC/24VAC, 110VAC, 240VAC
• Operating Current: from 25mA to 275mA depending on voltage
• Temperature Range: not available
• Flash Rate/ Minute: 80
• Mounting: Select from above: 240mm pole mount with M20  thread and nuts, pole and flat surface tulip base,  right angle bracket.
• IP56
• Listings: CE