LED Andon Light 56mm 1 Color PREF

 

Model PRE-F LED Andon Tower Light 56mm (2 1/4" diameter) is capable of either Continuous burning (standard), or flashing (now a FREE option) the LED light. Pre-wired and pre-assembled, this unit can be used with the mounting options shown above (use "check box" selection). Specify the color of the single color tower by using the "check box" above, the tower can be 1 of the 5 colors shown, and have a buzzer on top if you require (except 12 volt models).  Lenses are heat and shock resistant polycarbonate. Additional colored LED modules can be added later if desired--contact us for part#s.Prism-cut lens design provides superior light diffusion, 80 flashes per minute if used in a flashing mode. LED lamps resist vibration, and virtually eliminate maintenance. Buzzer option is available and produces a pulsed beep buzzer tone at 80db@1 meter (must be mounted as the top most component on the tower)IP56 rated (except if buzzer option is used). CE compliant, Specify Voltage by selecting above. If you prefer a turnkey assembled solution, please see the PREF-110-3-Custom on our site for an example of our popular assembled versions--also available in a single color LED unit--please inquire.

An LED Tower Light at a price that will not break the bank!

• Voltage available: 12VDC/12VAC, 24VDC/24VAC, 110VAC, 240VAC
• Operating Current: from 25mA to 275mA depending on voltage
• Temperature Range: not available
• Flash Rate/ Minute: 80
• Mounting: Select from above: various pole length with M20  threads and nuts, pole and flat surface tulip base,  right angle bracket, right angle support base used with no nut poles and tulip base.
• IP56
• Listings: CE