Dock Lights reduce accidents, injuries and damage to docks and trucks by increasing communications between drivers and dock personnel with the LOADING DOCK STOP and GO LIGHT, This single unit, rugged polypropylene outdoor Stop and Go Light gives the incoming driver a green or red light, telling them that if green, the driver is cleared to back into the dock, If red, the driver must wait for the cleared green light, When the trailer reaches the dock and is safely locked in place a manual toggle switch (included)is changed on the Stop and Go Light turning
the green to red informing the driver that the trailer is safely docked, FEATURES: A simple and cost effective warning system that reduces the risks of accidents around the loading dock, Establishes a clear line of communications between driver and dock
personnel, Compatible with most loading dock and dock leveler/restraint products. Optional LED lamps can be selected below when ordering (LED lamps are long-lasting) This incandescent lamp version, does include a toggle switch on the bottom corner of the light, and an internal flasher so you can wire to either steady burn or flash the colored lights, if intended to be used as the lamp on constantly (steady burning), heat build up within the unit may cause damage--the incandescent lamp version should not be used in a steady on mode--consider the LED Lamp version as an option if steady burning lamps are desired. Shallow depth prevents damage to unit, Integral eyebrow-type sun visors for extended visibility. Choose 12 Volt DC, 24 Volt DC, or 120 Volt AC operating voltage when ordering. Integral manual toggle SWITCH and FLASHER are included. Integral eyebrow-type sun visors for extended visibility. Choose 12 Volt DC, 24 Volt DC, or 120 Volt AC operating voltage when ordering. Lens Diameter 4.25", Dimensions 11 3/8"H, 6 3/8"W, 3 3/4"D. Don't forget the optional aluminum dock signs (select above--pricing appears on Basket Content screen). The Chock sign addresses the requirement by OSHA. OSHA Regulation 1910.178(k)(1):The brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.
Dock Lights at an affordable price...Contact us for quantity discounts!
- Voltage available: 12 VDC, 24 VDC, and 120 VAC--select below.
- Operating Current: Not Available
- Temperature Range: Not Available
- Listings: None
- Mounting: Surface Mounting
- Indoor /Outdoor Use
